Technical Knowledge Center

Industrial Coatings Knowledge Center

Practical guidance for owners, engineers, estimators and maintenance teams planning corrosion-control work.

Illustration of a technical binder, coated steel samples and a measurement gauge
Industrial technical reference illustration.

Surface Preparation and Service Life

Why cleanliness, profile and environmental control influence performance.

Read guide →

Blasting vs. Pressure Washing

Compare preparation methods by contamination, coating condition and profile requirements.

Read guide →

Coating System Layers

Understand the roles of zinc-rich primers, epoxies and polyurethane finishes.

Read guide →

Scope of Work Checklist

Define assets, preparation, materials, access and closeout requirements.

Read guide →

Substation Project Planning

Coordinate utility coating work around asset boundaries and owner controls.

Read guide →

Shop vs. Field Coating

Compare environmental control, access, transport and handling considerations.

Read guide →

Gulf Coast Corrosion

Plan around salt, humidity, wet-dry cycling and industrial exposure.

Read guide →

Project Closeout Records

Build a useful material, inspection, thickness and photo record.

Read guide →

Read a Product Data Sheet

Review service, preparation, mixing, thickness and recoat requirements.

Read guide →

DFT and WFT Explained

Understand film thickness, volume solids and measurement planning.

Read guide →

Dew Point and Humidity

Plan coating work around measured ambient and substrate conditions.

Read guide →

Holiday Testing Linings

Learn the basics of discontinuity testing, repairs and retesting.

Read guide →

Surface Profile Measurement

Plan and document the anchor profile produced by abrasive blasting.

Read guide →

Soluble Salt Testing

Address invisible contamination before protective coating application.

Read guide →

Cure and Recoat Windows

Coordinate dry times, recoating, handling and return to service.

Read guide →

Stripe Coating Details

Protect welds, edges, bolts and difficult industrial steel geometry.

Read guide →

Have a Project-Specific Question?

Send the asset, condition, specification and schedule for review.

New field notes

Follow practical updates on abrasive media, blasting, coatings and Gulf Coast project planning.

Browse Field Notes

Useful Details

Connect the question to the inspection stage

The knowledge center organizes preparation, application and closeout topics. Some checks occur before the first coat and cannot be reconstructed later; others confirm thickness, cure or required integrity testing. Review the relevant guide before finalizing inspection and documentation responsibilities.

Frequently Asked Questions

Knowledge Center FAQs

Are all tests required on every coating project?

No. Tests and methods follow the substrate, system and specification. Lining integrity testing, for example, is not assumed to be a universal exterior-coating requirement.

How should these articles be used in a bid review?

Use them to check whether the scope identifies preparation, product requirements, application conditions and acceptance. Resolve actual requirements through the approved project documents and authorized clarification path.