How is surface preparation selected?

Selection depends on substrate, contamination, existing coating, cleanliness, profile, access, containment and the coating system.

Application

Coatings for Industrial Tanks and Process Vessels

Q: Can you follow an owner or engineer coating specification?

Yes. Preparation, materials, film thickness, inspection points and documentation are reviewed against the supplied project requirements.

Q: What can delay return to service?

Weather, dew point, surface temperature, hidden corrosion, repairs, recoat windows, cure time and inspection hold points can affect completion.

Surface preparation and protective coating planning for tank and vessel exteriors.

Request a Quote Talk With Our Team

Coatings for Industrial Tanks and Process Vessels representative capability

Scope & Fit

Built Around the Asset, Environment and Specification

Each project is reviewed around asset condition, service exposure, access, schedule and the owner or engineer specification. Shop and field options are compared when appropriate.

Common project needs

Storage tanks
Process vessels
Separators and receivers
Ladders, platforms and nozzles

Planning

What We Evaluate Before Work Begins

Existing Condition

Substrate, corrosion, contamination and coating failure guide the preparation plan.

Exposure

Salt, moisture, chemicals, heat, abrasion and immersion affect system selection.

Specification

Required profile, cleanliness, dry-film thickness and inspection hold points are reviewed.

Execution

Shop versus field work, access, containment, transport and schedule are coordinated.

Selection considerations

Product service and temperature
Exterior versus lining scope
Access and containment
Inspection and repair criteria

Connected Capabilities

Related Services and Project Paths

Industrial CoatingsExplore this capability →Surface PreparationExplore this capability →Safety & QualityExplore this capability →Request a QuoteExplore this capability →

Frequently Asked Questions

Questions About Tanks and Vessels

What information should we send?

Provide the asset list, dimensions, location, photographs, existing condition, specification and schedule.

Can the work be completed in your shop?

Transportable assets can be evaluated for shop work based on dimensions, handling, route and booth fit.

Do you follow owner specifications?

Yes. Materials, preparation, application and documentation are planned around the approved project requirements.

Protect the Asset. Plan the Work. Get It Back in Service.

Share the asset, service environment, existing condition, specification and schedule.

Request Project Pricing Call 504-559-4330

Planning Tanks and Vessels Work for Gulf Coast Conditions

A dependable application plan starts with the substrate, existing condition, exposure, specification and operating schedule. Salt, humidity, condensation, chemicals, ultraviolet exposure and abrasion can change both the preparation requirement and the coating system needed for durable service.

Common assets

fabricated carbon steel
installed industrial equipment
transportable assemblies
related structural components

Problems addressed

substrate corrosion
failed or incompatible coatings
environmental exposure
mechanical wear

Scope controls

substrate and existing condition
service environment
preparation and profile
coating selection and cure

From Existing Condition to Return to Service

Inspect

Document substrate, coating condition, corrosion, contamination, access and dimensions.

Prepare

Define cleaning, coating removal, cleanliness standard and required surface profile.

Protect

Confirm primer, intermediate and finish coats for the specified exposure and service.

Verify

Coordinate ambient conditions, film-thickness checks, cure, touch-up and closeout records.

Questions That Affect Scope, Price and Schedule

Decision	Information needed	Why it matters
Shop or field	Dimensions, weight, access, transport route and operating constraints	Determines mobilization, containment, weather exposure and handling
Surface preparation	Substrate, existing coating, rust grade, contaminants and specified profile	Preparation quality is foundational to coating adhesion and service life
Coating system	Exposure, temperature, chemicals, immersion, abrasion and finish requirements	Different environments require different primers, build coats and topcoats
Schedule	Outage dates, access windows, cure requirements and return-to-service deadline	Controls sequencing, staffing, coating selection and delivery planning
Quality records	Specification, inspection points, DFT ranges and closeout expectations	Aligns the contractor, owner, inspector and manufacturer requirements

Tanks and Vessels FAQs

What information should we send for pricing?

Send the asset list, dimensions, photographs, project location, substrate, existing condition, service environment, specification, desired color and required schedule.

Can this work be completed in the Harvey shop?

Transportable assets can be reviewed for blasting and coating in the 80 × 20-foot enclosed booth. Fit depends on actual dimensions, handling, route, disassembly and cure requirements.

Do you provide field service across the Gulf Coast?

Qualified field scopes can be evaluated throughout Louisiana, Texas, Mississippi, Alabama and the Florida Gulf Coast based on project size, access, schedule and mobilization.

Can you follow an owner or engineer coating specification?

Yes. Provide the complete specification and coating schedule so preparation, materials, film thickness, inspection points and documentation can be reviewed before pricing.

How is the correct surface preparation method selected?

The method depends on substrate, contamination, existing coating, required cleanliness, anchor profile, containment, access and the selected coating system.

Can industrial pressure washing be included before coating?

Yes. Cleaning can remove salts, grease, dirt and other contamination before mechanical or abrasive preparation. The final preparation sequence must match the specification.

What can delay return to service?

Weather, dew point, surface temperature, access, discovery of hidden corrosion, additional repairs, recoat windows, cure time and inspection hold points can affect completion.

Do you coordinate pickup and delivery?

Transportation can be evaluated for shop projects. Provide dimensions, weight, pickup location, access conditions and required delivery date with the quote request.